TSL Tallyman TM1, Installation Manual

Page: 36 / 43

TallyMan V1.81 on | Specification 36
TM2
Internal Power Supply Specification
This is a MeanWell SP-300 Series unit. In the event of a failure the faulty item should be returned to
TSL for replacement.
The user should not attempt any repairs as this voids the PSU manufacturer’s warranty.
Manufacturer’s Specification Model SP- 300-24
DC Output Voltage 24V
Output Voltage Tolerance ± 1%
Output Rated Current 12.5A
Output Current Range 0 – 12.5A
Ripple and Noise 150mV pk-pk
Line Regulation ± 0.2%
Load Regulation ± 0.5%
DC Output Power 300W
Efficiency 86%
DC Voltage Adjustment 20 ~ 26.4V
Input Voltage Range 88~264VAC 47~63Hz; 124~370VDC
AC Current 4A/115V, 2A/230V
Power Factor 0.9/100~240VAC
Inrush Current 18A/115V 36A/230V
Leakage Current < 1mA/240VAC
Overload Protection 105~135% Type: Pulsing Hiccup Shutdown Reset: Auto Recovery
Over Voltage Protection 27.6-32.4V
Fan Control Over Temp Protect. RTH1 or RTH2 > 50 C Fan On, < 45 C Fan Off > 70 C Output Shutdown
Temp. Coefficient ± 0.03%/ C (0~50 C)
Setup, Rise, Hold up Time 1.5s, 50ms, 20ms
Vibration 10~500Hz, 2G 10min./1cycle, Period for 60min each axis
Withstand Voltage I/P-O/P:3KVAC I/P-FG: 1.5KVAC
Isolation Resistance I/P-O/P, I/P-FG, O/P-FG:500VDC / 100Mohms
Working Temp. Humidity -10 C-+50 C (Refer to O/P de-rating Curve), 20%-90% RH
Storage Temp. Humidity -20 C~+85 C, 10%~95% RH
Dimensions 215*115*50mm Case 912
Module weight 1.2Kgs
Safety Standards UL1950, TUV EN90950 Approved
EMC Standards CISPR22 (EN55022), IEC1000-4-2,3,4,5,6,8,11 IEC1000-3-2 Verification
Notes:
1. All parameters are specified at 230V I/P, rated load, 25 C, 70% RH ambient
2. Ripple and noise are measured at 20MHz using a 12” twisted pair terminated with a 0.1uF and 47uF capacitor.
3. Line regulation is measured from low line to high line at rated load.
4. Load regulation is measured for 0% to 100% rated load.
Back to Top ^