TSL Tallyman TM1, Installation Manual

Page: 39 / 43

TallyMan V1.81 on | Specification 39
TMC-1
Internal Power Supply Specification
This is a Zippy Technology Corp. R1V2-5275V4H power system and is 1+1 redundant power system
consisting of two R1V-2275V power modules and one R1V2-5275V4H power system frame. In the
event of a failure the faulty item should be returned to TSL for replacement.
The user should not attempt any repairs as this voids the PSU manufacturer’s warranty.
Manufacturer’s Specification Model R1V2-5275V4H
DC Output Voltage Output voltage Load Current (A) Regulation Tolerence
Min. Max. Max. Min.
+5V 0A 20A +5% -5%
+12V 0.1A 22A +5% -5%
-12V 0A 0.3A +10% -10%
+3.3V 0A 20A +5% -5%
5Vsb 0.1A 2.5A +5% -5%
Ripple and Noise +5V 50mV (P-P)
+12V 120mV (P-P)
-12V 120mV (P-P)
+3.3V 50mV (P-P)
+5Vsb 50mV (P-P)
Line Regulation
±
1%
DC Output Power 275W
Efficiency 78% ± 2% typical at full load 230VAC
Input Voltage Range 100~240 VAC full range (with ±10% tolerance)
AC Current 4A/115V, 2A/230V
Power Factor Correction 95%/90%, 115/240VAC
Inrush Current 30/70A, 115/230V (25 C cold start, per power unit)
Leakage Current < 3.5mA max at nominal voltage VAC
Overload Protection 110~170%, Reset: Remove load - cycle power
Over Voltage Protection Output Voltage Min Typical Max
+3.3V 3.6V 4.1V 4.3V
+5V 5.6V 6.1V 6.5V
+12V 13.2V 14.3V 15.0V
Hold up Time 20ms
Withstand Voltage I/P-O/P:3KVAC I/P-FG: 1.5KVAC for 60 seconds
Isolation Resistance I/P-O/P, I/P-FG, O/P-FG:500VDC / 100Mohms
Working Temp. Humidity 0 C to 50 C (90~264 VAC, Refer to O/P de-rating Curve), 20%-80% RH
Storage Temp. Humidity -20 C~+80 C, 10%~90% RH
Dimensions 295*106*41.8mm
Safety Standards UL 60950, TUV+CB EN90950, CCC GB4943-2001, GB9254-1998, GB17625.1-2003
Approved
EMC Standards CISPR22 (EN55022:2006) Class A