TSL MPA1 Series, Installation And Operation Manual

Page: 59 / 72

Page 59 of 72
MPA1-MIX-MADI Operation
The front panel of the MPA1-MIX-MADI is equipped with ten rotary controllers as follows:
Encoder Function Notes
1-8 Audio Level Rotate to adjust relative contribution of Sources 1-8 to Stereo
Monitoring Mix.
NOTE: Sources available are determined by the currently selected
Mix Bank (A-P) and the contributing audio channels for each Mix
Bank as set in the Routing Tab of the MPA-MIX-MADI. See Page
32
of this manual for further information.
PUSH to MUTE/UNMUTE contribution of Sources 1-8 to Stereo Mix.
NOTE: PUSH to MUTE/UNMUTE functionality can be disabled by
Setting 1 of the MPA-MIX-MADI Webpage, see Page
35 of the
manual for further information.
PUSH and ROTATE to adjust Balance of selected source or to map
alternate audio source to encoder.
NOTE: PUSH and ROTATE functionality is determined by Setting 2 on
the MPA-MIX-MADI Webpage, see Page 35 of the manual for further
information
PUSH and HOLD to enable SOLO Monitoring of selected source.
NOTE: PUSH and HOLD to enable SOLO Monitoring can be disabled
using Setting 3 of the MPA-MIX-MADI Webpage, see Page
35 of the
manual for further information.
9 Headphone Volume Rotate to adjust Headphone level as required.
PUSH to MUTE/UNMUTE entire Stereo Monitoring Mix from the
Headphone Output.
10 Select/Menu Rotate to Scroll through Mix Banks A-P or to adjust Level of Stereo
Monitoring Mix.
NOTE: The behaviour of the Select/Menu encoder is determined by
PUSH to MUTE/UNMUTE Internal Loudspeakers and Balanced
Analogue Audio Outputs.
9 2 1
3 4
5 6
8 7
10