TSL MPA1 Series, Installation And Operation Manual

Page: 18 / 72

Page 18 of 72
Initial Setup
TSL Products recommends connecting your MPA1 Audio Monitor to an Ethernet network during initial set-
up and configuration.
Full configuration of your MPA1 Audio Monitor can be achieved by way of a suitable Client PC and Web-
browser.
Setting the Control IP Address of your MPA1 Audio Monitor
All MPA1 Audio Monitors are shipped with a DHCP setting default to
‘DHCP ‘On’ .
To determine the current IP address of your MPA1, push and hold the SELECT/MENU encoder for 3 seconds
to access the
Settings Menu.
The
Settings Menu will now appear on the front panel
display of your MPA1, with the current IP Address shown.
Using the SELECT/MENU encoder, you can scroll through the
Settings Menu to highlight a Settings Sub-Menu of your choice.
The availability of Sub-Menus is depicted by the presence of the
following symbol:
>>
With the IP Address Sub-Menu highlighted as shown, briefly push the SELECT/MENU encoder to access the
Network Settings Menu (see below).
The SELECT/MENU encoder will now allow you to scroll through,
select and modify the Network Settings of your MPA1 in
accordance with the guidelines set by your Network
Administrator.
Once complete, select BACK to return to the
Settings Menu. You
can exit the Settings Menu by pushing and holding the
SELECT/MENU encoder for 3 seconds once more.