TSL MPA1 Series, Installation And Operation Manual

Page: 54 / 72

Page 54 of 72
MPA1-SOLO-SDI Operation
The front panel of the MPA1-SOLO-SDI is equipped with four rotary controllers as follows:
Encoder Function Notes
1 Headphone Volume Rotate to adjust Headphone level as required.
PUSH to MUTE/UNMUTE currently selected
audio source.
2 Output Volume Rotate to adjust the Audio Level of the Internal
Loudspeakers and/or Balanced Analogue
Audio Outputs.
PUSH
to MUTE/UNMUTE Internal
Loudspeakers and/or Balanced Analogue
Audio Outputs.
NOTE: The exact behaviour of this control can
be modified using the MPA1-SOLO-SDI
Webpage, see Settings 2,4 and 5 on Page
19 of
this manual for further information.
3 Select/Menu Rotate to Scroll through SDI Embedded Audio
Channels and/or AES and Analogue Audio
Channels.
PUSH to switch between Stereo and Mono
Audio Monitoring.
NOTE: Audio Sources available for selection
are determined by the settings found in
section 1 of the MPA1-SOLO-SDI Webpage.
See Page 20 of this manual for further
information.
The Select Menu Encoder is also used to access
the Settings Menu of the MPA-SOLO-SDI.
Further information can be found in the
Initial
Setup chapter found on Page 17 of this
manual.
4 Video PUSH to Switch between Audio Meter Display
and Video Display.
1
2 3
4