Page
56
of
72
MPA1-SOLO-DANTE Operation
The front panel of the MPA1-SOLO-DANTE is equipped with four rotary controllers as follows:
Encoder
Function
Notes
1
Headphone Volume
Rotate to adjust Headphone level as required.
PUSH to MUTE/UNMUTE currently selected
audio source.
2
Output Volume
Rotate to adjust the Audio Level of the Internal
Loudspeakers and/or Balanced Analogue
Audio Outputs.
PUSH
to
MUTE/UNMUTE
Internal
Loudspeakers and/or Balanced Analogue
Audio Outputs.
NOTE: The exact behaviour of this control can
be modified using the MPA1-SOLO-DANTE
Webpage, see Settings 2,4 and 6 on Page
29
of
this manual for further information.
3
Select/Menu
Rotate to Scroll through DANTE and/or MADI
Audio Channels.
PUSH to switch between Stereo and Mono
Audio Monitoring.
The Select Menu Encoder is also used to access
the Settings Menu of the MPA-SOLO-DANTE.
Further information can be found in the
Initial
Setup
chapter found on Page
17
of this
manual.
4
Balance/Pan
Provides Balance Control of Stereo Audio
Sources and Pan Control of Mono Audio
Sources. Setting affects Headphone, Internal
Loudspeakers and Balanced Analogue Audio
Outputs.
1
2
3
4
Summary of Contents for MPA1 Series
