Front Controls & Indicators
A
Power Switch
Use this switch to turn the UPS on.
B
Mode Key Switch
(some models)
With this switch in the NORMAL position, UPS operates normally.
When this switch is in the REMOTE position, power is supplied to the
equipment only when the telephone line is active.
C
Alarm Switch
With this switch in the ENABLED position, alarm will sound when AC
outage occurs. When this switch is in the DISABLED position, alarm is
disabled. However, when battery voltage is low, alarm will sound
regardless of the position of this switch.
D
AC On Light
This green light is on when AC power is present.
E
Battery Charging Light
This red light is on when battery is being charged.
F
Inverter On Light
This yellow light blinks when AC power is abnormal and UPS is
operating on battery.
G
Remote Mode Light
(some models)
This orange light blinks when UPS is placed in REMOTE mode using
the REMOTE switch.
2
¨
See p. 8 for more information about
Remote UPS Access.
A
ON
OFF
AC ON
BAT CHRG
P O W E R
ENABLE
DISABLE
INVON
A L A R M
UNINTERRUPTIBLE POWER SUPPLY
NORMAL
REMOTE
REMOTE
I N D I C AT O R S
U P S - 7 2 0 0
M O D E
B
C
G
F
E
D
¨
Note: Some models may
not be equipped with all
the features shown.
© Copyright—2000 TSi Power Corporation. All rights reserved.
TSi Power’s ongoing product improvement process makes specifications subject to change.
Other company’s product names herein are for identification purposes only and may be trademarks of their respective companies.
