Maintenance
43
Figure 4-5: Pull Filters Out of Two Filter Wells (Handheld Model)
c.
Put two (2) new filters into the filter wells and screw filter caps
back into place.
Note
Replacement filters were shipped with the new instrument.
Additional filters can be ordered from TSI under PN 801666.
Desktop Model
Put two (2) new filters into the filter wells and screw filter caps
a.
Open filter access door on the back of the instrument.
b.
Use the enclosed filter removal tool (PN 801668) to unscrew
filter cap.
c.
Pull out single cylindrical filter from filter well. If filter well is
visibly dirty, blow out with compressed air.
Figure 4-6: Pull out Single Cylindrical Filter from Filter Well
(Desktop Model)
