iii
Safety Information
I M P O R T A N T
There are no user serviceable parts inside the instrument. Refer all
repair and maintenance to a qualified factory-authorized technician.
All maintenance and repair information in this manual is included
for use by a qualified factory-authorized technician.
Laser Safety
•
The Model 8530/8531/8532 D
UST
T
RAK
™
II is a Class I laser-based
instrument.
•
During normal operation, you will
not
be exposed to laser radiation.
•
Precaution should be taken to avoid exposure to hazardous radiation in
the form of intense, focused, visible light.
•
Exposure to this light may cause blindness.
Take these precautions:
•
DO NOT
remove any parts from the D
UST
T
RAK
™
II monitor unless you
are specifically told to do so in this manual
•
DO NOT
remove the housing or covers. There are no serviceable
components inside the housing.
W A R N I N G
The use of controls, adjustments, or procedures other
than those specified in this manual may result in exposure
to hazardous optical radiation.
W A R N I N G
There are no user-serviceable parts inside this
instrument. The instrument should only be opened by TSI
or a TSI approved service technician.
When operated according to the manufacturer’s instruction, this device is a
Class I laser product as defined by U.S. Department of Health and Human
Services standards under the Radiation Control for Health and Safety Act of
1968. A certification and identification label like the one shown below is
affixed to each instrument.
