40
Certifier
®
FA Plus Test System
4.4 Factory Calibration
(recommended yearly)
Certifier
®
FA Test System flow modules are designed for one year of normal use
following each factory calibration.
If the test system has been dropped or liquid has penetrated any of its components,
do
not
use, and return to the factory for calibration.
Recalibrated flow modules come with a certificate of calibration and a summary of
performance before and after the calibration. A factory calibration consists of pressure
transducer calibration over the full range of pressures and calibration over the full range
of flows. All calibration datum are stored in the flow modules, so the Interface Module
does
not
require calibration. Therefore, it is not necessary to return the Interface
Module for factory calibration.
Follow the steps in
®
FA Test System flow modules
for factory calibration.
4.5 Return Procedure
Follow these steps to return Certifier
®
FA Test System flow modules for factory
calibration:
1. Obtain a Return Material Authorization (RMA) number using our online RMA form at
ntact one of the following offices to make service arrangements.
2. Package the flow modules carefully to avoid damage during shipping.
NOTE:
It is
not
necessary to return the Interface Module for factory calibration.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
www.
.com
1.800.561.8187
