TSI Incorporated VELOCICALC Plus 8360 Operation And Service Manual Download Page 4

Copyright

 

TSI Incorporated/September 1996/All rights reserved. 

Address 

TSI Incorporated/P.O. Box 64394/St. Paul, MN  55164/USA 

Fax No. 

(651) 490-2874 
 

LIMITATION OF WARRANTY AND LIABILITY. Seller warrants that this product, under normal use 
and service as described in the operator's manual, shall be free from defects in workmanship and material for 
a period of twenty-four (24) months, or the length of time specified in operator's manual, from the date of 
shipment to the customer. This limited warranty is subject to the following exclusions: 
a. 

Batteries and certain other components when indicated in specifications are warranted for a period of 90 
days from the date of shipment to the customer. 

b.  With respect to any repair services rendered, Seller warrants that the parts repaired or replaced will be 

free from defects in workmanship and material, under normal use, for a period of 90 days from the date 
of shipment to the customer. 

c.  Seller does not provide any warranty on finished goods manufactured by others. Only the original 

manufacturer's warranty applies. 

d.  Unless specifically authorized in a separate writing by Seller, Seller makes no warranty with respect to, 

and shall have no liability in connection with, any goods which are incorporated into other products or 
equipment by the Buyer. All goods returned under warranty shall be at the Buyer’s risk of loss, Seller’s 
factory prepaid, and will be returned at Seller’s risk of loss, Buyer’s factory prepaid. 

The foregoing is IN LIEU OF all other warranties and is subject to the conditions and LIMITATIONS stated 
herein. NO OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR PARTICULAR PURPOSE 
OR MERCHANTABILITY IS MADE. 

THE EXCLUSIVE REMEDY OF THE USER OR PURCHASER, AND THE LIMIT OF THE LIABILITY 
OF SELLER FOR ANY AND ALL LOSSES, INJURIES, OR DAMAGES IN CONNECTION WITH THIS 
PRODUCT (INCLUDING CLAIMS BASED ON CONTRACT, NEGLIGENCE, STRICT LIABILITY, 
OTHER TORT, OR OTHERWISE) SHALL BE THE RETURN OF THE PRODUCT TO THE FACTORY 
OR DESIGNATED LOCATION AND THE REFUND OF THE PURCHASE PRICE, OR, AT THE OPTION 
OF SELLER, THE REPAIR OR REPLACEMENT OF THE PRODUCT. IN NO EVENT SHALL SELLER 
BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTlAL DAMAGES. SELLER SHALL 
NOT BE RESPONSIBLE FOR INSTALLATION, DISMANTLING, REASSEMBLY OR 
REINSTALLATION COSTS OR CHARGES. NO ACTION, REGARDLESS OF FORM, MAY BE 
BROUGHT AGAINST THE SELLER MORE THAN ONE YEAR  AFTER THE CAUSE OF ACTION HAS 
ACCRUED. 

The purchaser and all users are deemed to have accepted the terms of this LIMITATION OF WARRANTY 
AND LIABILITY, which contains the complete and exclusive limited warranty of Seller. This LIMITATION 
OF WARRANTY AND LIABILITY may not be amended or modified nor may any of its terms be waived 
except by a writing signed by an authorized representative of Seller. 

 

Service Policy 

 
Knowing that inoperative or defective instruments are as detrimental to TSI as they are to our customers, our 
service policy is designed to give prompt attention to any problems. If any malfunction is discovered, please 
contact your nearest sales office or representative, or call TSI's Customer Service department at (800) 777-
8356 (USA)  and (1) 651 490-2711 :(International). 

Summary of Contents for VELOCICALC Plus 8360



























Reviews: