TSI Incorporated VELOCICALC Plus 8360, Operation And Service Manual

Page: 16 / 26

Chapter 3
10
When using the flow rate from pressure measurement mode, changing
the flow factor value will automatically clear the flow rate storage
buffer.
Average Function
Press the
AVERAGE
key to display the average of the stored values of
the current operating mode. The message “AVG” will appear along
with a number (between 1 and 255) indicating how many stored values
are in the memory buffer. The average value is then displayed for one
second. To keep displaying the average value, press and hold the
AVERAGE key. Additional values can be stored after the AVERAGE
key has been pressed. The next time the
AVERAGE
key is pressed,
the additional values are averaged with those already accumulated.
Clear Function
Press the CLEAR key to erase the stored value in the buffer of the
currently active function. Pushing the
CLEAR
key in one function will
not affect the values stored in other buffers. However, velocity and
flow rate from area use the same buffer, so clearing velocity will also
clear the flow rate. Flow rate from pressure is not affected by clearing
velocity. For example, pushing
CLEAR
while measuring velocity will
not affect the values stored for temperature.
Printer Port
While pushing the STORE , AVERAGE or CLEAR key the data is
automatically transmitted to the printer port. If the optional Model 8925
Portable Printer is connected the readings will be printed.