TSI Incorporated VELOCICALC Plus 8360, Operation And Service Manual

Page: 10 / 26

Chapter 2 4
or held in your hand. If the probe is to be used mounted to the V
ELOCI
C
ALC
,
remove the probe from its stowed position, turn it 180
°,
and reinstall
(pointing upward) in the probe mounting brackets.
Extending The Probe
To extend the probe, hold the handle in one hand while pulling on
the probe tip with the other hand. Do not hold the cable while
extending the probe as this prevents the probe from moving.
Retracting The Probe
To retract the probe, hold the handle in one hand while pushing on
the probe tip with the other hand. If you feel the probe antenna
binding, pull gently on the probe cable until the smallest antenna
section is retracted. Collapse the rest of the antenna by pressing the
probe tip.
When using the probe, make sure the sensor window is fully exposed and
the red orientation dot is facing upstream.