TSI Incorporated Q-TRAK Plus 8552, Operation And Service Manual

Page: 27 / 57

Operation 21
Sample Protocol for Log Mode 2 or 3
The following steps describe how to program a sample protocol for
Log Mode 2 or 3.
Log Mode 2 sample protocol features:
•
The sample protocol for Log Mode 2 is set to take unattended
readings for one day.
•
Logging takes place on 10/24/2000.
•
The logging sample begins at 8:00 a.m.
•
Logging continues for eight hours.
Log Mode 3 sample protocol features:
•
The sample protocol for Log Mode 3 is set up to take
unattended readings for four days.
•
Logging first takes place on 10/24/2000.
•
The logging sample begins at 8:00 a.m.
•
Logging continues for eight hours.
•
The instrument is off for 16 hours, and then repeats an eight-
hour test each day for the next three days.
The following graphic gives the appearance of the dialog box
displayed in the T
RAK
P
RO
software, with above-described logging
parameters.
Figure 3-10: Q-T
RAK
Plus IAQ Monitor Logging Example