TSI Incorporated 8372, Operation And Service Manual

Page: 32 / 55

22 Chapter 2
To view
STATISTICS
of a different
TEST ID
and the
BRANCH STATISTICS
1 Press
STATISTICS
to view the
TOTAL
of the current
TEST ID
.
“TEST ID”
and the current number of the
TEST ID
will flash on the small display.
The
“TOTAL”
value will be displayed on the large display.
2 Press the
▲
or
▼
key to move to other available
TEST ID
. The
“TOTAL”
will be displayed of the chosen
TEST ID
.
3 Press
ENTER
.
“BRANCH”
and its number, and
TEST ID
and its number
will flash alternately to identify the particular
BRANCH
selected. The
“TOTAL”
value will be displayed on the large display.
4 Press
STATISTICS
repeatedly to display
“MINIMUM”, “MAXIMUM”,
“AVERAGE”
, and
“COUNT”
.
5 Press the
▲
or
▼
key to move to another available
BRANCH
. The
“TOTAL”
will be displayed of the chosen
BRANCH
.
6 Press
STATISTICS
repeatedly to display
“MINIMUM”, “MAXIMUM”,
“AVERAGE”
, and
“COUNT”
.
7 Press
ENTER
to return to continuous measuring mode.
To review data of the current TEST ID
1 Press and hold
STATISTICS
key. Release the
STATISTICS
key when
“
TEST ID”
and the number of the current
TEST ID
flashes on the small
display. The big display has
“SUP”
and a
↓
to represent that it is a
supply Test ID. If the Test ID is a return Test ID the big display has
“RET”
and the
↑
indicated.
2 Press
ENTER
. The small display will flash
“TERMINAL”
along with a
number and will then flash
“BRANCH”
and a number. This identifies the
value that you are viewing with the
TERMINAL
number and the
BRANCH
with which it is associated. The value will be shown on the large
display.
3 Press the
▲
or
▼
key to move to other available
TERMINALs
in that
BRANCH
.
4 Press
ENTER
to return to continuous measuring mode.
To review data of a different
TEST ID
1 Press and hold
STATISTICS
key. Release the
STATISTICS
key when
“
TEST ID”
and the number of the current
TEST ID
flashes on the small
display. The big display has
“SUP”
and a
↓
to represent that it is a