baws002-gbr-0
TSCHAN
®
-S SD-5
- 8 -
7 Installation
7.1 To be observed prior to installation
•
Danger of injuries!
•
Disconnect the drive before carrying out any work on the coupling!
•
Secure the drive against unintentional re-start and rotation!
•
Incorrectly tightened bolts can cause serious personal injuries and
property damages!
•
Assemble the coupling outside of the danger zone. Take care that
suitable transportation means are at disposal and that the transpor-
tation ways are free of obstacles.
•
In compliance with accident prevention regulations, you are
obliged to protect all freely rotating parts by means of permanently
installed guards/ covers against unintentional contact and falling
down objects.
•
To avoid sparks, the covers for couplings used should be made of
stainless steel!
•
As a minimum, the covers have to fulfil the requirements of protec-
tion type IP2X.
•
The covers have to be designed to prevent dust from depositing on
the coupling.
•
The cover must not contact the coupling or impair the proper
function of the coupling.
•
Make sure that the speeds, torques and ambient temperatures as stated in chapter 6
‘Technical Data’ are not exceeded.
•
The maximum permissible bore diameters must not be exceeded.
•
Check whether the shaft-hub connections safely transmit the occurring operating torques.
•
The standard tolerance of TSCHAN for finish bores is fit H7.
•
Standard keyways comply with DIN 6885, sheet 1.
•
Check the dimensions and tolerances of shafts, hub bores, keys and keyways.
•
Set screws as required.
