3 Setup
3.1 Setting Up the Printer
1. Place the printer on a flat, secure surface.
2. Make sure the power switch is off.
3. Connect the printer to the computer with the RS-232 or USB cable.
4
.
Plug the DC power cord into the power jack at the rear of the printer, and then
plug the AC power cord into a properly grounded receptacle.
Note: When plug power code into the rear of printer please make sure the printer power switch is off.
RS-232C
Power Jack
6
USB
SD Card
Ethernet
Interface
Power Switch
Summary of Contents for XP-450B
Page 11: ...6 Close the printer top cover slowly and make sure the cover locks levers securely 8 ...
Page 14: ...11 ...
Page 16: ...13 ...