TSAT AS TSAT 3000 Command Reference Manual Download

Page: 36 / 41

Command Reference Manual

TSAT 3000 Command Line Interpreter

January 2013

Page 36 of 41

3.10.9 Block Up-Converter (BUC) Control

sys buc <state>

Override the current setting and force the BUC power ON or OFF.

Parameter:

<state>

“on”: Turns BUC power ON.
“off”: Turns BUC power OFF.
“auto”: Override disable. System controls BUC state.

sys buc status

Display information about the BUC.

sys buc ptest [<avgCount> [<vlimit> <climit>] ] [boe] [volt/curr]

DEBUG

Factory test command.

3.10.10 Low Noise Block (LNB) Control

sys lnb <state>

Override the current setting and force the LNB power ON or OFF.

Parameter:

<state>

“on”: Turns LNB power ON.
“off”: Turns LNB power OFF.
“auto”: Override disable. System controls LNB state.

sys lnb status

Display information about the LNB.

sys lnb ptest [<avgCount> [<vlimit> <climit>] ] [boe] [volt/curr]

DEBUG

Factory test command.

Summary of Contents for TSAT 3000










































Search results

Summary of Contents for TSAT 3000

Reviews:

Related manuals for TSAT 3000

Brands by name

Popular brands

TSAT AS TSAT 3000, Command Reference Manual

Search results

Summary of Contents for TSAT 3000

Reviews:

Related manuals for TSAT 3000

Brands by name

Popular brands