5
Using the charger:
a)
Use only dedicated power adapters to charge the battery.
Application of a power adapter dedicated to charge another type of the
battery unit poses a risk of fires.
b)
The supplied charger should only be used for charging
batteries that are supplied together with it.
Charging other
batteries may cause breaking and disintegration of the battery, bodily
harm, or fire.
c)
Do not disassemble the charger.
d)
The charger is designed exclusively for indoor use.
It must not
be exposed to water or moisture.
e)
Charge only in an ambient temperature between 15-25
degrees.
f)
Do not insert metal objects of any kind into the charger.
Fig.A
1.
Keyless chuck
2.
Clutch control knob
3
.
Rotation direction switch
The device is dedicated to drive in and out screws, drilling boreholes in
4
.
Drilling level/plumb indicator (level vial)
such materials as steel, wood, plastics, etc. The combo drill and
5
.
Handle
screwdriver is designed exclusively for DIY applications
.
6
.
Strap for hanging on hand
7
.
Battery
8.
Bit insert
9
.
Battery lock clip
10
.
Magnet
1
1
.
On/off switch
1
2
.
Auxiliary lighting
- Burns when changing drill bits (Drill bits heat up intensely during
operation; use protective gloves when changing the drill bit).
- Throwing back machined object or its fragment.
- Bending/breaking the drill.
APPLICATIONS AND CONSTRUCTION:
Despite using the tool according to its intended application it is
impossible to eliminate certain residual risk factors. Considering the tool
construction the following risks may occur when operating the tool:
- Touching the rotating drill bit with the hand
operator's clothes
.
n
The set includes:
ź
- 1 piece
ź
-
2
piece
s
ź
- 1 piece
ź
User's manual - 1 piece
ź
Warranty card - 1 piece
n
Device components
The numbering of device components refers to graphics presented on page
2 of the user's manual:
The tool must not be used for work requiring a professional tool.
Any use of the
that is not in observance with the above-
mentioned purpose is forbidden, leads to the loss of warranty, and
relieves the manufacturer from responsibility for the resulting damage.
Any modifications of the tool by the user relieve the manufacturer from
responsibility for any damage and injuries to the user and the
surroundings.
or
Cordless drill/s
crewdriver
Battery
device
Fig.C
Fig.F
Fig.G
Charger
13.
Charger
14.
Clutch setting indicator
15.
Drilling setting pictogram
16.
Left-threaded fixing screw
MODEL
Rotation speed under no-load conditions
Supply voltage
TUV14BL
TUV18BL
Chuck inner diameter
Rechargeable battery
Rated voltage
Electric capacity
Charging time
Battery weight
B
attery charger
Mains voltage
Output current
14,4 V
18 V
0-550 rpm
10 mm
14,4 V
18 V
1 h
1,5 Ah
230 V-240 V, 50 Hz, 45 W
Acoustic pressure level
(LpA)
Acoustic power
(LwA)
Vibration level according to: EN 60745-2-1/A11:07
a (t
olerance of measurements
K=1,5 m/s²)
h,D
2
0,969 m/s
(Drilling into metal)
85 dB(A)
96 dB(A)
TECHNICAL PARAMETERS
Li-ion
0,32 kg
0,52 kg
7,2-24 V DC; 1,3 A
Maximum torque
(
Gear
I/II)
19 Nm
16 Nm
Maximum drilling
diameter
Wood
Steel
16
mm
6
mm
18
mm
7
mm
Weight
(with battery)
1,5 kg
1,7 kg
0-550 rpm
10 mm
T
olerance of measurements
KpA/KwA
3 dB(A)
85 dB(A)
96 dB(A)
3 dB(A)
1 h
1,5 Ah
2
0,969 m/s
(Drilling into metal)
230 V-240 V, 50 Hz, 45 W
7,2-24 V DC; 1,3 A
