Trynex SnowEx V-MAXX SP-2400 H, Owner'S/Operator'S Manual

Page: 36 / 56

© Trynex International 2008 L1215
MAXXH — 36
Center High Mount Stop Lamp (CHMSL)
• Locate two short wires in vehicle harness to attach to vehicle brake light circuit.
• Locate vehicle ground wire and stop lamp power wire at rear of vehicle. Use supplied wire taps to connect harness to vehicle
electrical system. Once wire taps are installed check to make sure stop lamp works when brake pedal is pressed. Properly
complete installation by tying up any loose wires with ty-wraps, also add electrical tape over both connections to insure
a solid electrical connection. Some newer trucks have auxiliary stop lamp power leads already at the rear for these
types of applications.
CHMSL Spreader Harness
(installed on Spreader from factory)
Key Part No. Description Qty.
D 6158 #10 Lock Nut 2
D 6514 CHMSL Spreader Harness 1
D 6529 #10 Black Oxide Screw 2
CONNECT TO SPREADER LIGHT
HARNESS 2-CONDUCTOR PLUG
SP-8500H/9500H