Trynex SnowEx V-MAXX SP-2400 H, Owner'S/Operator'S Manual

Page: 6 / 56

© Trynex International 2008 L1215 MAXXH — 6
Safety
(continued)
Always inspect pins and latches whenever attaching or detaching spreader, and before traveling.
Never leave material in hopper for long periods of time. Be aware that all ice melters are hygroscopic
and will attract atmospheric moisture and harden up.
Remember, most accidents are preventable and caused by human error. Exercising of care and
precautions must be observed to prevent the possibility of injury to operator or others!
Never operate equipment when under the influence of alcohol, drugs, or medication that might alter
your judgment and/or reaction time.
Before working with the spreader, secure all loose fitting clothing and unrestrained hair.
Always wear safety glasses with side shields when servicing spreader. Failure to do this could result in
serious injury to the eyes.
CHMSL light must be installed and plugged in to meet DOT FMVSS-108 standards.
Always disconnect the spreader hydraulic hoses from there power source before servicing
the unit. Failure to do so could result in serious injury.
Make sure hydraulic couplers are fully connected, failure to do so will result in motor failure.