1. Introduction
TRP-C36, a high speed, single-port serial device, is designed to instantly convert data from
RS-232/422/485 interfaces to a Ethernet network running at the TCP/IP protocol. By using a
standard COM port and existing network infrastructure the device allow you to link together a
distant serial peripheral. You can reach TRP-C36 from Windows and Linux without the need to
modify existing software. TRP-C36 support 10/100Mbps auto-detecting, and auto RS-485 data
direction flow control, it also provides with 3000V DC isolation and internal surge protection to
protect the host computer and converter against high voltage spikes, as well as ground potential
difference. The industry standard DIN rail design enables fast and professional installation.
1-1. Features
¾
Wide input range DC power supply.
¾
Fully compatible with Ethernet and TCP/IP protocol.
¾
Support 3000V DC isolation protection.
¾
Auto direction flow control on RS-485.
¾
Supported baud rate up to 230.4Kbps.
¾
Power/Link/TX /RX mode LED indicator.
¾
Support intranet and internet system setting function.
¾
Support screw terminal and external DC power adaptor.
¾
Operation system: Windows/Linux/Mac
¾
DIN rail and panel mount support.
1-2. Specification.
¾
Power Input Voltage: DC +10V to +30V
¾
Interface Standard RJ45 LAN port.
¾
RS-232: 5 full-duplex (TXD,RXD,CTS,RTS,GND).
¾
RS-422: Differential 4 full-duplex wires.
¾
RS-485: Differential 2 half-duplex wires.
¾
Connection type: Screw terminal accepts AWG# 12~30 wires.
¾
Data Format: Asynchronous data with all common combination of bits, parity, stop.
¾
RS-422/485 line protection: Against surge, short circuit, voltage peak.
¾
Connection type: Screw terminal accepts AWG #12~30 wire
¾
Signal LED: Power on , Link, TX , RX
¾
Power supply: Screw terminal, or external DC adapter.
¾
Power consumption: 1.6W
¾
Isolation Voltage: 3000V DC
¾
Operating environment: 0 to 60
℃
¾
Storage temperature: -20 to 70
℃
¾
Humidity: 10~90% Non-condensing
¾
Dimension:151mm X 111mm X 26mm.
¾
Weight: 375g