Truxta QUADro Q300G, Operator'S Manual & Parts List

Page: 5 / 24

1. Always check oil level before starting.
2. Choke controls starting.
3. Pull to start
TO MOVE TRUXTA
6/7. Press yellow dead-man handle on right handle down for any movement.
Right handle lower lever for forward motion . Left handle lower lever for reverse motion.
8. TO STOP / PARK
Release dead-man handle to stop.
Release lower forward / reverse levers
9. Ideally park on flat surface.
10. Engine OFF switch & close fuel tap when transporting to prevent
carburettor flooding.
ON INCLINES
Do not use TRUXTA on inclines / ramps above 25°
Do Not travel forwards down inclines.
When Tipping always position on a flat Use skip tip handle to release the skip. The skip has a 2-stage tip
action to fully empty
Stage 1 Stage 2
OPERATOR INSTRUTIONS
4. Adjust choke controls when engine is running.
5. Engine rpm control lever
Page 5
OPERATOR INSTRUCTIONS
WARNING SYMBOLS & DECALS