Truxta QUADro Q300G, Operator'S Manual & Parts List

Page: 13 / 24

FORWARD CONTROL CABLE
REARWARD CONTROL CABLE
DIRECTION SAFETY
PIN (SHOWN IN
LOCKED POSITION)
CABLE ADJUSTMENT NUTS
PUMP
NEUTRAL
SETTING
DEPRESS
DEADMAN LEVER
TO DISENGAGE PIN
PUMP
DIRECTION
BRACKET
PUMP CONTROL SETTINGS
1: Adjust Deadman lever cable tension if required, see engage angle. Adjust cable
adjustment nuts. With Deadman lever in fully pressed position ensure the direction
safety pin is clear of control plate (see above)
2: Adjust forward/reverse direction levers cable tension if
required, ensure 3mm - 5mm gap when fully
pressed. Adjust cable adjustment nuts.
3: Ensure that with forward lever fully pressed
the pump direction bracket turns
15 degree forward direction 75 rpm @ wheels
4: Ensure that with rearward lever fully
pressed the pump direction bracket turns
5. degree rearward direction 30 rpm @
wheels
PUMP NEUTRAL SETTING
Adjust pump neutral setting if required if machine creeps forwards/backwards when
in neutral,
disconnect forward and rearward control cables
fully press Deadman lever to disengage the direction safety pin
loosen pump neutral setting screw
adjust angle of pump control bracket by rotating forward/backward until no creep
re tighten pump neutral setting screw when wheel rotation is 0 rpm
CABLE
ADJUSTMENT
NUTS
DEADMAN LEVER
10 - 20 degree
DEADMAN
LEVER
FULLY
PRESSED
DIRECTION
LEVERS
SERVICE & MAINTENANCE - PETROL
Page 13