TruVision TVF-5201 Configuration Manual Download

Page: 91 / 98

TruVision 6MP and 12MP 360° Camera Configuration Manual

To play back recorded video

1. Select the date and click the

Search

button. The searched video is displayed in

the timeline.

2. Click

Play

to start playback. While playing back a video, the timeline bar displays

the type and time of the recording. The timeline can be manually scrolled using the
mouse.

Note:

You must have playback permission to playback recorded images. See

“Modify user information” on page 77 for more information.

3. Select the date and click the

Search

button to search for the required recorded

file.

4. Click

to search the video file.

5. In the pop-up window, select the box of the video file and click

Download

download the video files.

To archive a recorded video segment during playback:

1. While playing back a recorded file, click

to start clipping. Click it again to stop

clipping. A video segment is created.

2. Repeat step 1 to create additional segments. The video segments are saved on

your computer.

To archive recorded snapshots:

1. Click

to open the snapshots search window.

2. Select the snapshot type as well as the start and end times.

3. Click

Search

to search for the snapshots.

4. Select the desired snapshots, and

click

Download

to download them.

Summary of Contents for TVF-5201



































































































Search results

Summary of Contents for TVF-5201

Reviews:

Related manuals for TVF-5201

Brands by name

Popular brands

TruVision TVF-5201, Configuration Manual

Search results

Summary of Contents for TVF-5201

Reviews:

Related manuals for TVF-5201

Brands by name

Popular brands