56
TruVision 6MP and 12MP 360° Camera Configuration Manual
10. Repeat the above steps to configure other regions. Up to four regions can be set.
You can click the
Clear
button to clear all pre-defined regions.
11. Click
Arming Schedule
to set the arming schedule.
12. Click
Linkage Method
to select the linkage methods. Select one or more response
methods for the system when an unattended baggage detection alarm is triggered.
13. Click
Save
to save the settings.
Recording schedule
You can define a recording schedule for the camera in the “Record Schedule” window.
The recording is saved on to the SD card or NAS in the camera. The camera’s SD card
provides a backup in case of network failure. The SD card is not provided with the
camera.
The selected recording schedule applies to all alarm types.
Figure 12: Record schedule window
Pre-record time
The pre-record time is set to start recording before the scheduled time or event. For
example, if an alarm triggers recording at 10:00, and the pre-record time is set to 5
seconds, the camera starts to record at 9:59:55. The pre-record time can be configured
as No Pre-record, 5 s, 10 s, 15 s, 20 s, 25 s, 30 s, or Not Limited.
Post-record time
The post-record time is set to stop recording after the scheduled time or the event. For
example, if an alarm triggered recording ends at 11:00, and the post-record time is set
to 5 seconds, the camera records until 11:00:05. The post-record time can be
configured as 5 s, 10 s, 30 s, 1 min, 2 min, 5 min, or 10 min.