TruVision 6MP and 12MP 360° Camera Configuration Manual
65
• You can upload people counting data to alarm recipient and client software through
SDK and HTTP (if configured).
To upload real-time data, select the
Real-Time Upload Data
check box.
To upload data regularly, set the
Data Statistics Cycle
as desired.
Note
: If data uploading by HTTP is required, set up the HTTP Data Transmission
parameters.
• You can send the people counting report to a configured email address.
Select report type (daily report, weekly report, monthly report, and annual report) to
activate the function.
Note
: Go to
Configuration
>
Network
>
Advanced Settings
>
to set up
email.
Advanced settings:
The
Advanced
submenu shows maintenance settings:
• Flow Overlay
It displays real-time flow information on screen. You can select the displayed data
type from the drop-down list.
• Daily Reset Time
You can set up a daily reset time or you can reset the counter manually by clicking
Manual Reset
.
Heat map
A heat map is a color-coded graphical representation of the movement of people
through a scene. The colors correspond to the amount of traffic and the amount of time
spent stationary in the configured scene. Heat maps are most commonly used for retail
applications to measure customer interaction within a store.
Note
: To use
Heat Map Statistics
, please ensure that you have installed and formatted
an SD card to provide the memory necessary for storing the heat map data.
For an accurate analysis
Ceiling Mount and 360° View
must be selected when setting
up the camera as otherwise the heat map function will not be available. See “Display
control” on page 10. If
Ceiling Mount
is not selected, the
Application
tab will not be
visible during setup.
To set up the heat map:
1. From the menu toolbar, click
Configuration
>
Heat Map Configuration
.
2. Select the
Enable Heat Map
check box to enable the function.
3. Under the submenu
Rule
, go to
Area Settings
to draw the detection area.
