TruTrak Vizion PMA Autopilot Operating Handbook Download Page 7

Page: 7 / 46

Rev: B

Vizion PMA Operation

TruTrak Doc: 167

2.2.

Definitions

This section will define terms used throughout the operation

manual to help with clarification regarding user interfaces, mode

usage, and display annunciation.

MOMENTARY PRESS AND RELEASE

– Refers to user interface.

A momentary press and release of the noted button or knob.

PRESS

– Refers to user interface. A press and hold of the noted

button or knob.

ROTATE

– Refers to user interface. A rotation of the knob.

GPS Nav

– Refers to mode usage. A point to point navigation

type that does not anticipate upcoming turns in a flight-plan.

Typically used with portable GPS units.

GPSS

– Refers to mode usage. A turn anticipating navigation

type that flies smooth intercepts to the next waypoint. Requires

an IFR GPS.

ASPEN HDG

– Refers to mode usage. The autopilot is receiving

and following a heading bug command from an Aspen product.

EXT HDG

– Refers to mode usage. The autopilot is receiving and

following an external heading bug command.

EXT ALT

– Refers to mode usage. The autopilot is receiving and

following an external altitude bug command.

Altitude Select

– Refers to mode usage. Selects a target altitude

for climbs or descents with the autopilot already engaged.

Altitude Pre-select

– Refers to mode usage. Selects a target

altitude for climbs with the autopilot disengaged.

Cursor

– Refers to display annunciation. An underlined value

can be adjusted by using the knob to select.

Summary of Contents for Vizion PMA Autopilot















































Search results

Summary of Contents for Vizion PMA Autopilot

Reviews:

Related manuals for Vizion PMA Autopilot

Brands by name

Popular brands

TruTrak Vizion PMA Autopilot, Operating Handbook

Search results

Summary of Contents for Vizion PMA Autopilot

Reviews:

Related manuals for Vizion PMA Autopilot

Brands by name

Popular brands