Rev: B
18
Vizion PMA Operation
TruTrak Doc: 167
5.2.2.
Disengaging the autopilot
The autopilot can be disengaged in one of three ways:
1)
Momentarily press and release the
KNOB
on the face of the
autopilot for 1.5 seconds;
2)
Momentarily press and release the
CWS
button.
3)
Removing power from the entire autopilot using the AP MASTER
or AP Circuit Breaker.
When disengaged, the autopilot will release control of both
servos. An example of a disengaged autopilot is shown in Figure
5.2.2a.
Whenever the autopilot is disengaged, it will send three short
tones to the buzzer (if equipped).
Figure 5.2.2a
