1. DR-10 OVERVIEW
The DR-10 Decarboxylation Reactor is capable of devolatizing
and decarbing up to 10 gallons of material per run.
Material is heated and mixed while under a low vacuum. Non-desirables
will evaporate and exit from the exchanger “arm”.
The jacketed vessel is heated with an oil heater which pumps hot
transfer oil through the vessel jacket. The crude material is mixed by the
motor/shaft/prop set on top of the vessel.
The condenser arm is cooled by a chiller unit. The system is under
vacuum.
Parts of the DR-10
1. Vessel w/ condenser arm
2. Mixer; controlled by a Variable Drive w/remote
3. Hot Oil Heater
Stainless steel braided hoses included with fittings; (1) 48” hose, (1) 72” hose
4. Chiller Unit (hoses included)
5. Vaccum Pump (hose included)
6. Kevlar heat protection jacket and a protective Kevlar glove
TruSteel
DR-10 CUTSHEET AND OPERATING MANUAL - 1
Page 1 of 21
