TRUST SPYC@M 300S
Note:
Deviations may also occur as a result of using new drivers available on
the Internet.
Note:
The location or name may vary in the ‘Control Panel’ for different
operating systems.
8
Using the software
8.1
Download photos from camera
See Quick Installation Guide step 6 and 7.
Note:
Click on download photos button (Fig. 5, 1), to download photos to the
application.
Tip:
After the photos are downloaded, left-click on the photo to select the
photo you want to transfer to your hard drive, or right-click on the photo
to have a close-up look (zoom in) of the photo; when in close-up mode,
left-click to zoom out.
Tip:
You can click on button (Fig. 5, 5) to select all photos in one time.
Note:
After you select the photos you want to save to your hard disk, you
need to click on save photo button (Fig. 5, 3) to save the photos into
your hard drive.
Tip:
There’s an edit button (Fig. 5, 4), with which you can adjust the
brightness and contrast of the photo.
Note:
The transfer photos button (Fig. 5, 2) will be colourful (enabled) when
you launch My DSC from Photo Impression or Funhouse; so you can
transfer the photos directly to the application software.
8.2
Using as a web cam
1.
Assure the driver is installed and camera is connected to the PC.
2.
Go to Start -> Programs -> Trust -> SpyC@M300S and then select
PC
CAM.
A program (see Fig. 6) will pop up.
Item Sub
item
Description
Set Capture
File…
To set the filename and path to where the
video file is saved
Allocate File
Space…
To set the size limit of the video file being
captured
Save
Capture
Video As…
To save the captured video as your desired
filename and location
File
Exit
To exit the program
Camera
Device
On upper list you see the video capture
device you are using, e.g. SPYC@M 300
Devices
Audio
Device
On lower list you see the audio device you
are using, i.e. your installed sound card
Preview
Select to enable preview of the video
Options
Audio
Format
To select the desired audio format, this may
depend on the sound card used
6
