TRUST 820 LCD POWERC@M ZOOM
12
4.7 Taking
photographs
Follow the instructions given below to take photographs using the Trust 820 LCD
PowerC@m Zoom.
1.
Turn the camera on using the
ON/OFF button (D) (see figure 4).
2.
Set the camera to the ‘Capture’ mode using the button (H).
3.
If you wish to take close-up photographs (55 cm to 80 cm), set the lens ring
(N) to the ‘Macro’ mode by turning the ring anticlockwise.
If you wish to take photographs of the surroundings or of people (160 cm to
infinity), set the lens ring (N) to the ‘Normal’ mode
by turning the ring
clockwise.
4.
Use the viewfinder (F) or the LCD screen (J) to direct the camera at the
subject you wish to photograph. You can turn the LCD screen (J) on using
the
LCD ON/OFF button (I, (see figure 4).
5.
Press the exposure button (E) to take a photograph. The photograph will
appear on the LCD screen for a couple of seconds with the message
‘Processing’ until the photograph has been saved in the memory.
6.
The LCD screen will then return to the normal display. You can now direct the
camera at the next subject and take more photographs.
Note:
If you take photographs with the default camera settings, it is
possible that the quality of the photographs will not always be
optimal. Different surroundings produce different results. Adjust
the camera settings as required. See chapters 4.3, 4.4 and 4.5
for the possible options.
4.8 Viewing
photographs
Once you have taken some photographs, you can view then on the LCD screen (J).
Follow the instructions given below to do this.
1.
Turn the camera on using the
ON/OFF button (D) (see figure 4).
2.
Set the camera to the ‘PlayBack’ mode using the button (H) (see figure 4).
3. Use
the
UP ARROW and the DOWN ARROW button (G) to scroll
through the photographs in the memory and view them on the LCD screen (J,
(see figure 4).
4.9 Deleting
photographs
You can choose to delete one photograph from the memory (if you do not wish to
keep it) or all the photographs (if you wish to clear the camera’s memory and start
taking photographs again). Follow the instructions given below to do this.
4.9.1
Deleting one photograph
Follow the instructions given below to delete one photograph.
1.
Turn the camera on using the
ON/OFF button (D) (see figure 4).
2.
Set the camera to the ‘PlayBack’ mode using the button (H) (see figure 4).
3. Use
the
UP ARROW and the DOWN ARROW button (G) to scroll
through the photographs in the memory and view them on the LCD screen (J,
(see figure 4).
