TRUST SPEEDSHARE TURBO PRO WIRELESS PCI ADAPTER
Problem
Cause
Possible solution
Other network using the
same channel.
Infrastructure: change the
channel number in the
wireless router.
Ad-hoc: shutdown all stations
except one, change the
channel for this one and
power up the others again.
802.11b and 802.11g
products are mixed.
Upgrade the wireless network
to 802.11g compatible
products.
A connection is made with
an 11 Mbps network or an
even slower network.
In a network with a slower
connection, the speed will
always be as fast as the
slowest link.
The distance between the
computer and the Access
point is too great.
A greater distance reduces
the connection speed. Try to
move closer to the Access
Point to increase the
connection speed.
Its switched off.
Check the connection speed
in the Windows network
properties. Should be
108Mbps. The utility should
report a speed in excess of
54Mpbs.
Infrastructure network only:
there are users around
with older 802.11b
products.
Disable 802.11b support by
enabling the ‘802.11g only’
mode in the wireless router.
Distance too great,
interference, channel
already in use.
Move around for better
reception.
Turbo mode is not
working or very
slow.
Some or all stations have
Turbo switched off or do
not support it.
Check if all products are
supporting the Turbo Mode
and this is enabled in all of
them.
The latest FAQ’s are
available on the Internet.
See www.trust.com/13645 for
FAQ’s and other product
information.
In general: Wireless
networking is continuously
being developed.
Check frequently for updates.
See www.trust.com/13645
The problem is not
listed here.
Other network problems.
See the Troubleshooter:
www.trust.com> Customer
Care > Troubleshooters >
Network.
Table 4: Troubleshooting
Check the FAQ's on the Internet (www.trust.com). You can register your product at
www.trust.com, so that you can receive optimal guarantee and service support. You
16
