Trust 12440, User Manual

Page: 23 / 26

TRUST SPYC@M 300
17
U K
8 Troubleshooting
Method
1. Read the solutions given below.
2. Check for up-to-date FAQ’s, drivers and instruction
manuals on the Internet (www.trust.com/12440).
Problem Cause Possible solution
The computer's USB
port does not work. Check the settings of your USB
port. For more information, see
www.trust.com/customercare/help/
usb.
The camera has not
been connected to a
USB port. Connect the camera to a USB port
Windows does
not detect a new
device after
connecting the
camera.
The camera has
been connected to a
USB hub which
does not have a
power supply. Connect the camera to a USB hub
which has a power supply or to a
USB port on your computer.
The camera has not
been connected to a
USB port. Connect the camera to a USB port Error message
‘Capture device
was not detected’
is displayed.
The camera has
been connected to a
USB hub which
does not have a
power supply. Connect the camera to a USB hub
which has a power supply or to a
USB port on your computer.
The camera has
been connected to a
USB hub which
does not have a
power supply. Connect the camera to a USB hub
which has a power supply or to a
USB port on your computer.
The TRUST
SPYC@M 300 is
marked with an
exclamation mark
‘!’ in the ‘Device
Manager’.
The camera has an
IRQ conflict with a
different device in
your computer. Make IRQ addresses free. Also
see:
www.trust.com/customercare/help/
general
The TRUST
SPYC@M 300
does not work in
combination with
the TV / capture
card. There is a conflict
between the camera
and the TV card. Carry out the following.
1) Remove the TV Capture card.
2) Install the SPYC@M 300.
3) Install the TV capture card.
The batteries have
been inserted
incorrectly. Reinsert the batteries (see chapter
3).
The camera is
turned off. Turn the camera on
The camera does
not do anything.
The batteries are
empty. Replace the batteries (see chapter
3).
!