0°
bevel cut
45°
bevel cut
Tightening Up
10
• To make up to 45° bevel cuts adjust the cutter head
column into the desired angle.
• Loosen the bevel cut knob (
28
).
• Move the column using the bevel cut scale (
29
) as a
guide.
• Once the column is in the desired angle tighten the knob
to block its position.
• Double-check to tighten the knob to
fix the column before starting to cut. Otherwise the cutter
head could move and cause severe injury.
• To return the cutter head to 0° position loosen the bevel
cut knob and return the column to 0° position until the
blocking lock for 0° bevel cuts gets automatically inserted
and securing the column in that position. Tighten the bevel
cut knob.
Tighten up the cutter head to make bevel cuts
Tighten up the rotating table to make miter cuts
• To make 45° and up to -45° miter cuts use the rotating
table (
16
).
• Loosen the miter knob lock (
20
) and press the quick
adjustment lever (
16
) to release the rotating table.
• Turn the table into the desired angle. Use the miter scale
(
19
) as an aid. This scale is built with 0°, ±15°, ±22.5 °
±31,6° and ±45° stops to quickly set the most common
miter angles.
• Release the lever to fix the table.
• Double-check the knob is tightened to
fix the table before starting to cut. Otherwise the table
could move and cause a severe injury.
WARNING
WARNING
45° miter cut
-45° miter cut
0° miter cut
28
19
20
16
18
20
29
ENGLISH
DRAFT
DRAFT
DRAFT
