Assembly
• Set the dust-collecting pouch (
36
) in the dust-collecting
chute (
13
) found in the back of the cutter head column.
Dust collecting pouch
• To secure the work piece onto the cutting table use the
vertical press (
21
).
• Fix it in one of the orifices (
23
) regarding the job to do.
• To secure in place the vertical press, tighten the knob
firmly (
22
).
Press
8
13
36
21
22
• The arms are useful to support work pieces exceeding
the cutting table area.
• To install onto the worktable loosen the extension arms
locks (
25
).
• With the help of the special wrench, remove the screw at
the end of each extension.
• Set the extension arms on both sides of the table.
Tighten the locks.
• With the help of the special wrench and the arms
mounted, tighten the screw that was previously
removed.
Side extension arms
20
24
25
23
• Insert the lock (
20
) into the hole on the front of the
machine.
• Ensure that the thread assembles with the counter.
Miter lock
ENGLISH
DRAFT
DRAFT
DRAFT
