8
Maintenance
ENGLISH
• We recommend taking the tool to a
Authorized Service Center to lubricate the drive wheel
every time replacing carbon brushes is needed.
• Keep the vent slots clean and without obstructions to
guarantee adequate motor cooling.
• Inspect every now and then all the mounting screws and
verify they are correctly fastened. If a screw is loose tighten
immediately.
• Carbons should be checked periodically. When worn
take the tool to a Authorized Service
center to have them replaced.
• After replacement ask to see if the new carbons can
move freely inside the carbon housing and to run the
motor 5 minutes to even contact between carbons and
commuter.
• Use only original
spare carbons
specifically designed with the hardness and resistance
adequate for each type of motor. Carbons that are out of
specification could damage the motor.
• Both carbons should be changed simultaneously.
• Service for the tools shall only be carried out in a
Authorized Service Center.
• Service and maintenance carried out by non-qualified
people may be dangerous and could cause personal injury.
It also makes the Warranty void.
Lubrication
Cleaning and care
Carbon brush replacement
Service
Summary of Contents for 16706
Page 9: ...9 Notes ENGLISH ...
Page 21: ...9 Notas ESPAÑOL ...