RiverGrille GR2297801-RG-00 Assembly & Operating Instructions Download

Page: 1 / 51

1 of 51

20190813-Ver.1.0

PELLET HYBRID GRILL

Model number: GR2297801-RG-00

ASSEMBLY & OPERATING INSTRUCTIONS

For Outdoor Use Only



This instruction manual contains important information necessary for the

proper assembly and safe use of the appliance.



Read and follow all warnings and instructions before assembling/using the

appliance.



Follow all warnings and instructions when using the appliance.



Failure to follow these instructions and warnings could result in damage to the

product or injury to the user.



Keep this manual for further reference.

Should you encounter any problem,

CALL US FIRST.

Do not return product to the store.

WE CAN HELP.

For assistance, contact customer service at

[email protected]

or at

1-888-837-1380

, Mon to Fri, 8:00am – 5:00pm Pacific Standard time

Summary of Contents for GR2297801-RG-00




















































Search results

Summary of Contents for GR2297801-RG-00

Reviews:

Related manuals for GR2297801-RG-00

Brands by name

Popular brands

RiverGrille GR2297801-RG-00, Assembly & Operating Instructions

Search results

Summary of Contents for GR2297801-RG-00

Reviews:

Related manuals for GR2297801-RG-00

Brands by name

Popular brands