• It is necessary to replace with new carbon brushes, worn (or burnt, broken or
smaller than 0.19” long carbon brushes).
• Anytime carbon brushes need replacement, always replace both carbons.
• Remove worn carbon brushes from the carbon brush housing and remove
accumulated dust with compressed air.
• Set the new carbon brushes reversing the order. Carbon brushes should
easily fall into the carbon brush housing.
• After setting the new carbon brushes, let the router running unloaded for a
couple minutes to get a better adjust.
• Use only original spare carbons specifically designed
with the hardness and electric resistance adequate for each type of motor.
Carbons that are out of specification could damage the motor
Carbon brush cap
9
Maintenance
Notes
• Double-check the vent slots in the machine are free of sawdust, chips, etc.
• Keep the guides clean and lubricated with all-purpose light oil.
• Service for the tools shall only be carried out in a Authorized Service Center.
• Service and maintenance carried out by non-qualified people may be dangerous and could cause personal injury. It also
makes the Warranty void.
Carbon brush replacement
Service
ENGLISH
