Truper 101403, Manual, Page: 6 / 24

20V
20V
Parts
Handle
Rotation and block
direction button
LED
light
Speed
selector
Switch
Battery
release
button
Charge
indicator
Battery
Belt clip
Drive
6
ENGLISH
Battery Level
Indicator
1
2
Start Up
Battery charge
1
. Plug in the charger in a 127 V~power outlet. A green
light of the charge indicator will light.
2
. Insert the battery into the charger sliding it as shown in
the figure. The green light will turn off and the red light
should come on, indicating that charging has started.
• When the battery is completely charged, the green light
will be on and the red light will be off.
• Disconnect the charger from the power once the charge
is completed.
• If the red light is blinking it signals a defective battery.
Replace with a new one.
• In case the green light is blinking it signal the
temperature in the battery is lower to 32 °F or higher than
113 °F. Wait until the battery temperature is in the
adequate level to be able to charge it.
Battery
connection
teeth
Battery
charger
In model MAX-20LS,
battery and charger are sold
separately.
NOTE