Truper 101403, Manual

Page: 5 / 24

5 ENGLISH
Safety warnings
• Use only Truper Max chargers to charge
the battery. Using a different charger may cause fire or
injury hazard.
• Use only batteries specifically designed
for the tool. Different batteries could generate risk of injury
or fire.
• Do not use the charger outdoors.
• When charging, obey the “+/-“ polarity.
• Never recharge a leaking battery or that is visibly
damaged.
• Do not use batteries or a charger for purposes different
that it was designed for.
• Do not modify the battery contacts or the chargers.
• Never expose the batteries to higher than 212 °F
temperatures or direct sun light.
• Never expose the batteries to fire or
impact. They could explode.
• Batteries shall be kept away from
metallic objects like clips, coins, keys, nails, screws or other
type of object making contact with the terminals. It would
cause a short circuit and burns or fire. They should be kept
clean, dry and in good repair.
• Under extreme conditions the battery
liquid could spill out. Avoid any contact. If an accidental
contact happens clean with enough water. If the battery
liquid comes into contact with your eyes, clean with
enough water and immediately go see the doctor. Liquid
expelled from the batteries could cause irritation or burns.
• Remove battery when not in use.
• If the battery will be stored for long
periods of time, keep an intermediate charge (40%) to
maximize its useful life. Do not leave it completely charged
for long periods of time, or leave it charging when not in
use.
• Keep batteries away from children reach.
• Do not discard batteries together with household trash.
Go to a specialized center for it’s recycling.
Battery and Charger
• Take your time to assess the job to be done and double
check you are paying attention to the necessary caution
advices before starting to drill.
• Adjust correctly the accessory.
• Verify the switch is in the OFF position
before inserting the battery. Otherwise it will start working
unexpectedly, causing severe injuries.
Use the auxiliary handles, it supplied whith the tool.
Loosing control may caus personal injuries.
Before operating the tool
• This tool is designed to work with dies.
IT'S NOT A DRILL.
• This is a tool for light work, it should not be used to
remove or place screws that require high torque.
• Do not attempt to modify the tool or its accessories in
any way.
• Turn on the impact wrench after placing the die.
• Do not use too much force.
• Do not use this tool with one hand.
• After each use, remove the dies and extensions and
store them well
Danger of suffocation! Children can
swallow small pieces and suffocate.
Keep children away from small pieces.
Hold the power tool by the insulated grip surfaces
when performing an operation where the fastener
can make contact with hidden wires or its own
power cord.
Fasteners that come into contact with an energized cable
can convert the metal parts of the power tool into live
parts and as a result, they can cause an electric shock to
the operator.
• Wear anti-dust mask and dust extraction equipment if
necessary. Remember that working with materials like
asbestos, leaded paint, additives, some types of wood,
metals or minerals are highly toxic.
• Wear safety eyeglasses.
When operating the impact wrench
• Choose the right die for the work piece.
It reduces the risk of severe injury and makes the job easier.
• Do not try using dies exceeding the drive capacity.
Choose the right accessory
WARNING
DANGER
DANGER
DANGER
DANGER
CAUTION
CAUTION
CAUTION
CAUTION
DANGER
CAUTION
for Cordless Impact Wrench