18
Operation
E605EN_01.DOC
4. Operation
Warning
Risk of injury due to improper handling!
¾
Make sure the machine is always in a stable position when
operating it.
¾
Wear safety glasses, hearing protection, protective gloves
and work shoes during work.
¾
Never touch the tool while the machine is running.
¾
Always move the machine during work away from your body.
¾
Do not operate the machine above your head.
Warning
Health risk from breathing cutting oil!
¾
Ensure adequate ventilation when working with cutting oil.
¾
Do not inhale vapors that occur.
Caution
Damage to property caused by blunt tools!
Machine overload.
¾
Check tools regularly for wear: sharp multi-edge cutters
provide good cutting performance and protect the machine.
¾
Rotate or replace multi-edge cutter.
The motor shuts off with excess load.
¾
Allow the machine to run in idle until it has cooled down.
The machine can be operated again normally after it has cooled
down.
Note
Coat the cutting edges with oil before machining steel and
aluminum or aluminum alloys. In this way:
•
The cutting result is improved.
•
The service life of the tools is increased.
Material
Oil
Steel
Punching and nibbling oil (0.5 l, order no. 103387)
Aluminum
Akamin oil (1 l, order no. 125874)
Motor overload protection
Table 9
