E605EN_01.DOC
Setting
work
13
3.3 Utilizing radius tool and multi-edge
cutters as tools
When deburring or chamfering with radius the multi-edge cutter
mount R is inserted completely. The integrated multi-edge cutter
mount consists of the multi-edge cutter mount R, the multi-edge
cutters and the impeller R.
The multi-edge cutters, the actual tools as radius tools, are:
•
useable for processing steel, aluminum and aluminum alloys
as well as plastic material.
•
suitable for processing bevels with radius R2 or R3.
There is an appropriate multi-edge cutter for each material:
Tensile strength of the
workpiece
Radius
Multi-edge
cutter
Chamfer
height [mm]
Steel up to 400 N/mm²
R2
St R2
1.1
Steel up to 400 N/mm²
R3
St R3
1.7
Steel up to 600 N/mm²
R2
Cr R2
1.1
Steel up to 800 N/mm²
R2
Cr R2
1.1
Aluminum/aluminum alloy²
R2
Cr R2
1.1
Steel up to 600 N/mm²
R2
Cr R2
1.1
Plastic material (PA6)
R2
Cr R2
1.1
Multi-edge cutters and setting value
Note
•
The values of the chamfer height are recommended values
which could differ from the specified values in individual cases.
Multi-edge cutters and
setting value
Tab. 7
