E605EN_01.DOC
Maintenance
23
5. Maintenance
Warning
Risk of injury from the battery!
¾
Remove the battery when changing tools and before
performing any maintenance work on the machine.
Warning
Risk of injury due to repair work not being carried out
properly!
Machine does not work properly.
¾
Repair work may only be carried out by a qualified technician.
Caution
Damage to property caused by blunt tools!
Machine overload.
¾
Check tools regularly for wear. Sharp multi-edge cutters
ensure good cutting quality and protect the machine. Rotate
or replace multi-edge cutters in a timely fashion.
Maintenance point
Procedure and interval
Recommended
lubricant
Lubricant
order no.
Gearbox and gear head
After 100 operating hours, arrange for a trained
specialist to relubricate or to replace the
lubricating grease.
Lubricating
grease "G1"
0139440
Thread gear housing complete
and thread support plate
complete
Clean and lubricate as needed.
Lubricating
grease "G3"
0353969
Multi-edge cutters
Rotate or replace as needed.
-
-
Impeller Replace
if
required.
-
-
Rechargeable battery
Replace as necessary.
-
-
Maintenance points and maintenance intervals
Table 10
