TruTool PN 130 (1A1)
Maintenance
Disassembling the punch
1. Release the lever (5) by at least three revolutions.
2. Pull carrier (4) out of the housing (1).
3. Remove punch (3).
Installing the punch
1. Lubricate the punch (3) and carrier (4) with lubricating grease "G1".
2. Hang the punch (3) in the groove of the punch holder (2).
3. Insert the carrier (4) into the housing (1).
4. Tighten the lever (5).
Changing carrier
1. Release the lever (5) by at least three revolutions.
2. Pull out carrier (4).
3. Insert the new carrier (4) into the housing (1).
4. Tighten the lever (5).
5.2 Readjusting the lever
The position of the lever can be readjusted as needed.
1. Tighten the lever (5).
2. Release the screw (6) on the lever.
3. Pull off the lever (5) and clean it.
4. Align the lever (5) parallel to the motor and retighten the screw (6).
E613en_02
17
