18
Maintenance
E614EN_03.DOC
5.2 Disassembling the punch
1. Open locking mechanism (8).
2. Rotate the die carrier (6) by 45°.
3. Pull die carrier (6) out towards the bottom.
4. Turn punch (7) until it can be pulled out.
5.3 Installing the punch
1. Lightly lubricate the square part of the punch (7) and bore hole
on the die carrier (6) with lubricating grease "G1" (order no.
0344969).
2. Rotate the punch (7) to the 45° position.
3. Connect the die carrier (6).
4. Make the locking mechanism (8) engage.
5.4 Changing the die and the punch guide
1. To replace the die and the punch guide, unscrew the fixing
screws (3 and 4).
2. Clean the support areas on the die carrier (6).
3. Take care to ensure that the replacement parts are clean.
4. Lubricate the guide surfaces of the punch guide with lubricating
grease "G1" (order no. 0344969).
5. Screw the fastening screws tightly when mounting the die and
the punch guide (torque 9 Nm). Use original screws only.
