E454EN_04.DOC
Maintenance
13
5. Maintenance
Danger
Possible lethal danger due to electric shock!
¾
Pull the plug out of the socket when carrying out tool changes
and before all maintenance work on the machine.
Caution
Damage to property possible due to blunt tools!
Overloading of the machine.
¾
Check the cutting edge of the cutting tool hourly for wear.
Sharp cutting tools provide good cutting performance and are
easier on the machine. Replace punches promptly.
Warning
Risk of possible injury due to improper repairs!
The machine does not function properly.
¾
Repairs should be carried out only by a trained specialist.
Maintenance point
Procedure and time interval
Recommended lubricants
Order No.
Lubrication
agents
Punch and die carrier
With each tool change
Lubricating grease "G1" (tube) 25 g 344969
Gearbox and
gear head (2)
After 300 operating hours,
arrange for a trained specialist to
relubricate or to replace the
lubricating grease
Lubricating grease "G1" 900 g
139440
Punch
Regrind as needed
-
-
Punch
Replace as needed
-
-
Ventilation slots
Clean as needed
-
-
Die
Replace as needed
-
-
Maintenance positions and maintenance intervals
Table 5
