E454EN_04.DOC
Operation
11
Note
The cutting result is improved and the service life of the blade
increased if the cutting track is coated with oil before machining the
workpiece.
Material
Oil
Steel
Punching and nibbling oil, Order No.
103387
Aluminium
Wisura oil, Order No. 125874
1. Do not move the machine towards the workpiece until full
speed has been reached.
2. Machine/process the material.
–
Machine the desired cutting line.
3. In the event that the cutting track ends in the sheet, pull the
still-running machine a few millimetres back towards where the
cutting track has already been cut open.
4. Switch off machine.
¾
Move the On/Off switch to the rear.
4.1 Changing the cutting direction
In situations where space is limited, the tool and/or the cutting
direction can be turned by 90° to the right or to the left
(see Fig. 9766, Pg. 15).
1. Open locking mechanism (31).
2. Rotate die carrier (3) by 90° in the desired direction.
3. Close the locking mechanism again (31) manually.
Table 4
Working with the
TruTool N 350
Switching off the
TruTool N 350
