Trumpf TruTool DD 1010, Original Instructions Manual

Page: 15 / 172

15
en
- Keep all connection contacts on the
power tool, recharger and battery clean.
- Store battery in a cool, dry location at
a temperature of 5 °C to 25 °C.
- Protect batteries against moisture and
water as well as heat.
- Do not leave a dead battery in the
recharger more than approx. one
month if the recharger is not plugged in.
There is a risk of deep discharge.
- Charge a Li-ion battery to 50% capacity
if it will not be used for an extended
period.
- Store the battery in its original packag -
ing to avoid short circuits.
6. Transport
- Observe the regulations for transporting
hazardous materials when transporting
multiple batteries.
- Do not transport defective batteries.
- Observe national regulations.
7. Disposal
- Dispose of power tools, batteries,
accessories and packaging via appro -
priate recycling.
- Do not dispose of power tools, batteries
or rechargeable batteries as household
waste.
- Observe national regulations.
8. Declaration of conformity
We declare under our sole responsibility
that this product conforms to all relevant
requirements of the following guidelines,
standards and normative documents:
2006/42/EC, 2004/108/EC, 2011/65/EU,
EN 60745.
Achim Ott
Managing Director
TRUMPF Grüsch AG
7214 Grüsch, Switzerland
12/11/14
9. Warranty
A term of liability of 12 months from the
date of purchase applies to TRUMPF
power tools. Damage that can be
attributed to normal wear, overcharging
or improper handling of the device is
excluded from the terms of warranty.
Damage arising from errors in materials
or manufacturing will be replaced or
repaired at no cost. Complaints can only
be recognized if the device is returned
to your TRUMPF representative without
being dismantled.
BA_TruTool_DD1010_2014-12-16.indb 15 22.05.2015 09:48:03