1.
Planning aid
The planning aid provides an overview of the measures to be
taken and preparations to be made.
For details, refer to the corresponding sections of these installa-
tion conditions.
Time before the deliv-
ery of the machine
Planning criterion
Required measures
8 - 12 weeks
Personnel and training
■
Appoint a member of staff to be responsible for
preparations for the delivery of the machine.
■
Appoint operating and service personnel and pro-
grammers.
■
Arrange training schedules for specialist personnel.
8 weeks
Installation site
■
Determine the installation site of the machine, tak-
ing into account the space requirements according
to the installation plan.
■
Check floor requirements:
−
Floor quality.
−
Flatness.
−
Oil-resistant floor without expansion joints.
■
Take the weight and dimensions of the machine
into account.
■
Check the requirements for ambient conditions:
−
Room temperature.
−
Exposure to sunlight.
−
Purity of the ambient air.
■
Check transport route, e.g.:
−
Gateway openings.
−
Doors.
−
Cable rack heights.
−
Shunting areas around corners.
8 weeks
Electrical system
■
Install electrical connections at the installation site.
■
Lay the conductor cross-section and fuse protection
according to the legal requirements.
■
Have the work required for remote support carried
out.
■
For network connection: install the network connec-
tion at the installation site.
3 weeks
Transport
Provide auxiliary transport equipment.
Note:
If the machine is conveyed to the customer's
site by Technical Service, the required means of trans-
portation and auxiliary transport equipment is provided
by them.
2-3 weeks
Feedback
■
Provide TRUMPF with feedback to confirm that the
requirements of the installation conditions have
been implemented.
During installation and
start-up
Electrical installation
■
At the start of the installation process: have the sys-
tem connected by a trained electrician.
Planning aid
Tab. 2-1
2
‐
4
Planning aid - Version 2
B1154en
